Aerpro Under Radio Universal Pocket
71 88009000
Fits under an aftermarket radio when a double DIN style unit has been replaced. Snap-on trim rings blend the pocket into the dash and it is internally ribbed to hold three CD jewel cases. Supplied with clips and mounting brackets to suit many modern vehicles.
|
|
Aerpro Harness with ISO Connector for Early Mitsubishi Models
71 APP0110
Two plug type ISO connector for most early Mitsubishi models.
|
|
Aerpro Harness with ISO Connector Mitsubishi
71 APP0111
One plug type ISO connector for most late Mitsubishi models.
|
|
Aerpro Harness with ISO Connector for Nissan 1995 On
71 APP0120
ISO connector to suit most higher value Nissan models. e.g. 350Z, Maxima, 200SX, Pathfinder, X- Trail, Xterra, etc.
|
|
Aerpro Harness with ISO Connector for Nissan 1987 On
71 APP0121
ISO connector to suit most other Nissan models. e.g. Pulsar, Pintara, etc.
|
|
Aerpro Harness with ISO Connector for Most Earlier Toyota Models
71 APP0140
Larger two plug type ISO connector for most earlier Toyota models.
|
|
Aerpro Harness with ISO Connector for Most Late Toyota Models
71 APP0141
Smaller two plug type ISO connector for most late Toyota models.
|
|
Aerpro Harness with ISO Connector for Most Daewoo Models
71 APP030
ISO connector to suit most Daewoo models.
|
|
Aerpro Harness with ISO Connector for Ford Falcon EA-ED
71 APP050
ISO connector to suit Ford Falcon models EA-ED, March 1988 to August 1994.
|
|
Aerpro Harness with ISO Connector for Ford Falcon EF-EL
71 APP051
ISO connector to suit Ford Falcon EF-EL 1995 on.
|
|
Aerpro Harness with ISO Connector for Ford Falcon AU
71 APP053
ISO connector for Ford Falcon AU.
|
|
Aerpro Harness with ISO Connector for Holden Commodore VN-VP
71 APP060
ISO connector for Holden Commodore VN-VP, 1988-93.
|
|
Aerpro Harness with ISO Connector for Holden Commodore VR-VS
71 APP061
ISO connector for Holden Commodore VR-VS.
|
|
Aerpro Harness with ISO Connector for Holden Commodore VT
71 APP062
ISO connector for Holden Commodore VT.
|
|
Aerpro Harness with ISO Connector for Most Honda Models
71 APP070
ISO connector for most Honda models 1986 on.
|
|
Aerpro Harness with ISO Connector for Most Hyundai Models
71 APP081
ISO connector for most Hyundai models 1991-2000.
|
|
Aerpro Harness with ISO Connector for Most Hyundai Models
71 APP085
ISO connector for most Hyundai models 2000 on.
|
|
Aerpro Harness with ISO Connector for Most Subaru Models
71 APP090
ISO connector for most Subaru models.
|
|
Aerpro Harness Universal Female ISO Connector
71 APP7200
Universal female ISO connector to bare ends.
|
|
Aerpro Harness Universal Male ISO Connector
71 APP7201
Universal male ISO connector to bare ends to suit Audi and Volkswagen. This harness has an inbuilt link for the illumination wire in an Audi or Volkswagen.
|
|
Aerpro 16 Square Pin Plug Alpine Harness with ISO Connector
71 APP8ALPH
Suits the latest model Alpine car audio units. 16 square pin plug with square holes.
|
|
Aerpro 16 Round Pin Plug Alpine Harness with ISO Connector
71 APP8ALPL
Suits the latest model Alpine car audio units. 16 round pin plug with round holes.
|
|
Aerpro 15 Pin Plug Clarion Harness with ISO Connector
71 APP8CLA
Suits all latest model Clarion car audio units.
|
|
Aerpro 16 Pin Plug JVC Harness with ISO Connector
71 APP8JVC
Suits all latest model JVC car audio units. 16 Pin Plug (2 x 8).
|
|
Aerpro 14 Pin Plug Kenwood Harness with ISO Connector
71 APP8KE
Suits Kenwood car audio units from 2000 to 2004. 14 Pin plug.
|
|
Aerpro 16 Pin Plug Kenwood Harness with ISO Connector
71 APP8KE1
Suitable for all Kenwood models 2005 on. 16 Pin connection with two large pins for power and earth. Makes for easy DIY installation.
|
|
Aerpro Panasonic Head Unit to ISO Wiring Harness
71 APP8PAN
Suits all latest model Panasonic car audio units. Makes for easy DIY installation.
|
|
Aerpro 14 Pin Plug Pioneer Harness with ISO Connector
71 APP8PIO
Suits all latest model Pioneer car audio units. 14 Pin plug.
|
|
Aerpro 12 Pin Plug Sony Harness with ISO Connector
71 APP8SP
Suits all latest model Sony car audio units. 12 Pin plug.
|
|
Aerpro Water Resistant Radio Cover
71 FP9005
Plastic cover protects against dust, water and UV rays. Recessed for DIN, shaft or pull out applications. Design allows for the door to be opened up or down. 240mm x 100mm x 50mm.
|
|
Aerpro Snap In Pocket for Ford and Mazda
71 FP9014
Has a black finish and DIN fitting. Easy to fit.
|
|
Aerpro Toyota Pocket
71 FP9016
Under radio storage pocket to suit various Toyota and Nissan vehicles. Supplied with left and right side mounting brackets, Made of ABS plastic with a black finish.
|
|
Aerpro Stereo Lead
72 ADM125W
2m lead with 2.5mm stereo plug to 3.5mm stereo plug. Connects i-Pods and MP3 players to vehicle head unit.
|
|
Aerpro Stereo Lead
72 ADM135W
2m lead with 3.5mm stereo plug to 3.5mm stereo plug. Connects i-Pods and MP3 players to vehicle head unit.
|
|
Aerpro Stereo Lead with RCA Plugs
72 ADM235W
2m lead with 3.5mm stereo plug to 2 male RCA plugs. Connects i-Pods and MP3 players to vehicle head unit.
|
|
Aerpro Stereo Audio Plug To Stereo Right Angled Plug
72 AP135
3.5mm stereo audio plug to 3.5mm stereo right angled plug. 1m audio lead with right angled plug at one end. Packaged in colour hang sell blister pack.
|
|
Aerpro MDF Speaker Spacers
72 AP3151
Fit speakers 133-152mm (5.2-6"). Outer diameter 160mm, 16mm thick, these spacers allow speakers to clear objects behind them. Sold in pairs.
|
|
Aerpro Speaker Spacers
72 AP316
Ideal for use when car is fitted with gas tank. UV stabilised and 25mm deep. Suit 133-152mm (5.25-6.5 in) speakers. Sold in pairs, blister packed.
|
|
Aerpro MDF Speaker Spacers
72 AP3161
Fit speakers 165mm (6.5"). Outer diameter 182mm, 16mm thick, these spacers allow speakers to clear objects behind them. Sold in pairs.
|
|
Aerpro Angled Speaker Spacers
72 AP317
Extenders fit 152 x 229mm (6 x 9in) speakers and enable them to be angled towards the front of the vehicle. Raises speaker by 38mm (bottom of angle) to 78mm (top of angle). UV stabilised and blister packed in pairs.
|
|
Aerpro Speaker Spacers
72 AP318
Fit 152 x 229mm (6 x 9in) speakers and are 40mm deep. Ideal when gas tank is fitted to vehicle. Tapered spacer raises speaker by 40mm. UV stabilised and blister packed in pairs.
|
|
Aerpro MDF Speaker Spacers
72 AP3181
These spacers are 152 x 229mm (6 x 9in) and 16mm thick, allowing speakers to clear objects behind them. The outer diameter is 285 x 187mm. Sold in pairs.
|
|
Aerpro Bassix Series RCA 1 Female to 2 Male Adaptor Lead
72 AP322A
Blue PVC with gold plated connectors for better conductivity. Moulded strain relief ends to avoid breaking the centre conductors. Braided OFC shielding with outer diameter 4 + 4mm. Length 220mm. Packaged in colour hang sell blister pack.
|
|
Aerpro Bassix Series RCA 2 Female to 1 Male Adaptor Lead
72 AP323A
Blue PVC with gold plated connectors for better conductivity. Moulded strain relief ends to avoid breaking the centre conductors. Braided OFC shielding with outer diameter 4 + 4mm. Length 220mm. Packaged in colour hang sell blister pack.
|
|
Aerpro Power Distribution Block - 2x4 Gauge In to 4x8 Gauge Out
72 AP406
Solid Brass with hexagon set screws. Block is gold plated with clear perspex cover. Packaged in colour hang sell blister pack.
|
|
Aerpro AGU Inline Fuse Holder
72 AP452A
Improved design fitted with water resistant grommets and end caps which will not loosen. Suits 4 gauge or 8 gauge cable and has gold plated fittings, protected by a perspex cover. Packaged in colour hang sell blister pack.
|
|
Aerpro ANL Inline Fuse Holder
72 AP462
Accepts 0 gauge or 2 gauge cable. Suitable for any high current, low voltage application. Has gold plated fittings and water-resistant grommets. Packaged in colour hang sell blister.
|
|
Aerpro ANL Type Fuse
72 AP466
72 AP466 80 Amp
72 AP467 100 Amp
72 AP468 150 Amp
72 AP469 200 Amp
For high current usage. Suits AP462 fuse holder. Packaged in hang sell blister.
|
|
Aerpro 60 Amp In-line Circuit Breaker
72 AP484
With gold plated fittings, the 60 Amp in-line panel mount circuit breaker accepts 4 or 8 gauge cable, which is secured by set screw fittings. It is moisture and dust protected and fitted with weatherproof grommets. Packaged in hang sell blister pack.
|
|
Aerpro 4 Gauge Ring Terminal
72 AP610
This ring terminal is a double set-screw type with insulating sleeve. Made of gold plated brass for excellent conductivity, it suits 8mm posts and 4 gauge cable. Packaged in colour hang sell blister pack.
|
|
Aerpro 8 Gauge Ring Terminal
72 AP612
This ring terminal is a set screw type made of gold plated brass for excellent conductivity. It suits 8mm posts and 8 gauge cable. Packaged in colour hang sell blister pack.
|
|
Aerpro 4 Gauge Fork Terminal
72 AP701
Contains two red and two black gold plated terminals. Suit 4mm posts. Packaged in colour hang sell blister pack.
|
|
Aerpro 8 Gauge Ring Terminals
72 AP702
Contains six red and six black gold plated terminals. Suit 8mm posts. Packaged in colour hang sell blister pack.
|
|
Aerpro Male 12 Gauge Fork Terminals
72 AP704
Contains six red and six black gold plated terminals. Suit 4mm posts. Packaged in colour hang sell blister pack.
|
|
Aerpro 8 Gauge Fork Terminals
72 AP707
Contains six red and six black gold plated terminals. Suit 3mm posts. Packaged in colour hang sell blister pack.
|
|
Aerpro 12 Gauge Spade Terminals
72 AP711
Contains two large red and two small black gold plated terminals. Ideal for speaker terminals.
|
|
Aerpro Sub Woofer Grille
72 AP772
Powder coated mesh with PVC rim and supplied with mounting accessories. 305mm (12in). Sold individually in poly bags.
|
|
Aerpro Speaker cable
72 AP940-12
Oxygen free copper cable with clear PVC insulation and polarity identification with one silver core and one copper core. Length 12m of 2x40/0.12mm. Packaged in hang sell blister pack.
|
|
Aerpro 300 Watt 8 Gauge Power Cable Installation Kit
72 AP953
Complete installation kit for an amplifier up to 300 watt, using 8 gauge cable. Includes RCA leads, earth cable, power cable, speaker cable, trigger cable, terminal, fuse and fuse holder. Fitting instructions supplied. Packaged in colour hang sell blister pack.
|
|
Aerpro 300 Watts 10 Gauge 2 Channel Installation Kit
72 AP959A
Complete installation kit for an amplifier up to 300 watt, using10 gauge cable. Includes RCA leads, earth cable, power cable, speaker cable, trigger cable, terminal, fuse and fuse holder. Fitting instructions supplied. Packaged in colour hang sell blister pack.
|
|
Aerpro 600 Watts 8 Gauge 4 Channel Installation Kit
72 AP960
Complete installation kit for an amplifier up to 600 watt, using 8 gauge cable. Includes RCA leads, earth cable, power cable, speaker cable, trigger cable, terminal, fuse and fuse holder. Fitting instructions supplied. Packaged in colour hang sell blister pack.
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)