Wildcat Pod Filters
Give your engine a breath of fresh air, replace your original air
filter with a high performance / hi flow Pod Filter
Most pod filters are sold as universal fitment, the adaptors that
are used to attach them to your intake are not supplied with the
filter and have to be purchase separately.
Heat should also be considered when installing your pod filter,
as hot air will reduce the benefits of reduced restriction. Heat
shields are available and should be used to protect the filter.
Listed below are some of the benefits of fitting Pod Filters
• Dramatically out-performs original filters
• Washable, Re-oil, Reuse – over and over again
• 360? of filtration for maximum air flow
• Accordion element design for increased surface volume
• Less restriction = More horse power (Kilowatts)
• Available in red, blue, chrome and carbon fibre
Wildcat have a range of adaptors available to suit most
MAINTENANCE & CARE
Wildcat cleaning kit and re-oiling kits are available and
we recommended that you use when servicing your filter
Air filters should be cleaned every 10,000-kms
1/ Remove your filter from your vehicle
2/ Brush the element (red cotton part) gently with a soft brush.
3/ To clean the element spray with the air filter cleaner fluid
and leave to soak for 10
4/ Wash the element with low water pressure. The direction of the
wash should be
from the inside of filter to the outside of the filter.
5/ The air filter must dry naturally.
DON’T USE COMPRESSED AIR or HAIR DRIERS to dry filter.
6/After cleaning and drying the filter must be oiled. Ensure that
all filtration foils
are oiled evenly
7/ Reinstall the filter to the vehicle.